UAV Applications

UAV Remote Sensing Applications


Assembled HexaCopter at NESAC


Assembled Fix-Wing UAV

dji inspire

DJI Inspire -1


DJI Matrice 600 Haxacopter

Unmanned aerial vehicle - UAV popularly known as drone, is an airborne system or an aircraft operated remotely by a human operator or autonomously by an onboard computer. There are two broad classes of UAVs- Fixed wing and Rotary based. UAV combined with remote sensing technology have been creating new vistas in global scenario to acquire the geospatial data on land resources and environment. The imagery obtained from UAVs can immensely support in many applications ranging from large-scale mapping, urban modelling to vegetation structure mapping. Specifically in the NE region of our country with limited connectivity and difficult terrain condition, the local planning and developmental activities can be greatly improved by the UAV survey.

UAV remote sensing (UAV-RS) is the new addition to the North Eastern Space Applications Centre (NESAC) for large-scale mapping and real time assessment, monitoring activities under various applications. NESAC has taken initiative for design and assembling of UAV for various applications. Different components of the UAV are selected based on the design parameters and assembled as per the requirements.

Facilities such as UAV data processing lab, digital photogrammetric systems, GIS systems, survey systems like GPS, etc., supported by dedicated human resources take care of all the analysis and processing requirements.

UAV Systems

The Centre has both fixed wing UAV and multirotor based UAVs - quad copter and hex copter and has capability for both manual as well as autonomous flights. The fixed wing UAV has a flight endurance of about 50-60 mins with a flying range of 5-10 kms and heavy payload capacity. The copter type UAV has 1.5-2.0 kg of payload capability and can be customized to carry sensors such as Thermal, Multispectral, Optical, Hyper spectral or LIDAR etc. It can attain maximum altitude up to 500 m with range of 2 Kms. It can fly for about 20-40 mins

UAV Sensors

NESAC has a 12 MP RGB camera and another 12 MP RGB camera with 2X zooming capability. Both the cameras can capture videos up to 4K resolution and images at fixed intervals i.e. 2-10 secs. NESAC also has a Multispectral sensor with four 1.2 MP panchromatic bands as Green, Red, Red Edge and NIR. All the sensors provided geotagged images in Jpeg/Tiff format.

3D Printing

3D printing facility is new edition to UAV Lab at NESAC. The printer is having a build volume of 215 X 215 X 300 mm with a max. resolution of 20 microns and supports different materials such as PLA, Nylon, ABS, PVA etc. for printing. The 3D printer is being used to develop inhouse mini UAVs along with other accessories related to UAVs. A mini quad copter has been designed and printed using 3D printer with Nylon material having a dimension of 100 X 300 X 70 mm and total weight of 1kg.

UAV Remote Sensing facilities for SRSACs of NER

NESAC has also facilitated all the State Remote Sensing Centers (SRSACs) of North Eastern Region (NER) in setting up of UAV Remote Sensing facility which is funded by North Eastern Council (NEC). Each of the SRSACs were provided with a quad copter (M100) and a UAV data processing software (AGISoft). NESAC has also provided training on UAV operation, data acquisition & processing and also providing continuous support to all the SRSACs


DJI Matrice 600 Hexacopter


DJI Matrice 100 Hexacopter


4 band Multispectral Sensor


Mini Quad copter printed using 3D printer


Figure 1: 3D view of landslide area along Guwahati-Shillong highway (NH-40)


Figure 3: Crop infestation analysis at Morigaon, Assam